Villages Sprinkler Repair Sprinkler Repair Pricing in The Villages: Published, Not Hidden
Here is what sprinkler and irrigation repair actually costs in The Villages: a $75 to $150 service call that covers the visit and the diagnosis, then a published range for whatever is actually wrong. Most calls are a single failed part, fixed the same visit. Full job ranges are below.
The service call
| Charge | Range | What it covers |
|---|---|---|
| Service call / diagnostic | $75 to $150 | Travel, running every zone, checking heads and the valve box, testing the controller and rain sensor |
Everything past this is the repair itself, quoted after the tech has actually seen the system, not guessed at it over the phone.
Typical job pricing
| Job | Typical range | Notes |
|---|---|---|
| Sprinkler head replacement (single) | $15 to $50 per head installed | Parts and labor, added to the service call |
| Sprinkler head replacement (typical visit) | $100 to $250 | Most visits replace 2 to 5 heads across one or two zones |
| Irrigation valve repair | $150 to $350 | Diaphragm, solenoid, or debris clearing on an existing valve |
| Irrigation valve replacement | $200 to $450 | The valve itself has failed beyond repair |
| Sprinkler timer/controller repair | $100 to $250 | Reprogramming, a wiring fix, or a minor part |
| Controller replacement (standard) | $200 to $600 installed | |
| Controller replacement (smart/WiFi) | $300 to $700 installed | Includes app setup |
| Broken lateral line repair | $100 to $300 | One zone’s line, found and repaired |
| Broken mainline repair | $200 to $600 | Before the valves, affects the whole system, usually a bigger dig |
| Rain sensor installation or replacement | $100 to $250 installed | Required by Florida Statute 373.62; see our rain sensor page |
| Zone coverage fix / adjustment | $100 to $275 | Nozzle swaps, arc and radius changes, head relocation, no broken part required |
| Irrigation system inspection / tune-up | $90 to $200 | Full walk of every zone, valve box, sensor, and controller battery |
| Drip irrigation conversion or install | $250 to $800 per zone | Beds and foundation plantings, run off an existing zone or its own valve |
These are the same numbers on the cost calculator, the service pages, and every quote a tech gives you. If a number does not match, ask why.
What moves the price within a range
Access. A head or valve in an open lawn is quick. One buried under a paver path, inside a dense hedge, or under a shed takes longer and costs more.
What’s actually broken versus what looks broken. A “dead zone” is sometimes a $150 valve fix and sometimes a $600 mainline dig, and you cannot tell which from the symptom alone. The service call exists to find out before anyone quotes a number.
A second problem hiding behind the first. Systems here often fail one part at a time over years, so a valve box that has not been opened in a while can turn up a slow solenoid on a neighboring zone in the same visit. We flag it and quote it, we do not fix it silently and surprise you on the invoice.
Non-potable water. Homes on a reclaimed or non-potable irrigation main (common south of CR 466 and in Districts 5 through 14) tend to see faster nozzle and filter-screen clogging from sediment in that supply, which can mean the repair also includes a filter clean or screen replacement.
Season. Right before the standard watering schedule resumes after a shortage order, and right before residents head north for the summer, are our busiest stretches. Prices do not change; scheduling lead time does.
How the quote works, start to finish
- You describe the problem and where the system is (address, gate code if applicable).
- We schedule the visit, service call quoted up front.
- The tech diagnoses on site: every zone, not just the one you flagged.
- You get one written number: service call plus repair plus parts.
- You approve, we work. If something else turns up mid-job, we stop and quote it before continuing.
A note on licensing
Florida licenses irrigation contracting county by county in most places (Sumter County, for example, covers it under its Plumbing Contractor license classification), plus a separate voluntary statewide specialty license some contractors hold instead of a local card. Ask any technician which license they hold and who issued it, and confirm it yourself with the county or at myfloridalicense.com if it matters to you. We will never tell you “our techs are licensed” and leave it at that.
Prices are honest ranges, not promises; the actual system decides the final number. What we promise is the process: diagnosis first, your approval before work, and no surprise line items. Run your own numbers on the cost calculator, or check the FAQ if you have a question these tables did not answer.
Frequently Asked Questions
What does the service call cover?
Travel to your property and the diagnosis: running every zone, checking heads, opening the valve box if needed, and testing the controller and rain sensor. It runs $75 to $150. After that you get a written repair number and approve it before any work starts.
Is the service call applied to the repair?
Service call and repair are quoted as separate line items so you always know what you are paying for. You get the full number, service call plus repair plus parts, before anything starts.
Why is there a range instead of a flat price?
A single head swap on an easy-access zone sits at the low end. A valve replacement that needs a dig, or a mainline break under a paver walkway, sits at the high end of its range. You get the exact number after the tech diagnoses the actual job, not before.
Do I get a written estimate?
Yes, every time. Service call, repair, and parts are broken out, and nothing changes without your approval.